Q: How can a Wowplane model be finished?
A: The core of
a Wowplane model is made from precision cut CNC EPS foam and usually consist of between 10 to 15
pre-shaped foam parts. The model can be assembled as a foam only and painted
with water based paints. Sheeted
with balsa. Fiber glassed over bare foam or after balsa sheeting. Or painted
with Wowplane's revolutionary Liquid Sheet. A 2 part liquid that is brushed on,
and provides a hard glossy skin that can be painted with most paints.
Q: Are your planes ARFs or Kits?
A: They are a BUILDER'S KITS. We use a quick
build technique that takes a lot
less time than a built up balsa frame kit.
Q: What else is included?
A: Everything that you cannot purchase at a Hobby Shop or can easily fabricate is included. Between 10 to 15 pre-shaped foam parts, and a complete set of quality
vacuum formed plastic parts. Some models also include a set of pilots and
Q: What power set up do you recommend or
A: We have tested power setups specified on the spec page of each model
we sell. This setup will fly off grass and will provide good performance
and speed as shown in the flight videos on the spec pages.
Q: Can I use my own setup?