Click on topic below
Copyright 2008. All rights reserved.
Picture Gallery RC Forum Manual Spares
The Martin B-26 Marauder went through a rocky history before becoming the known stalwart of the United States Army Air Force that people know it to be. Designed by Peyton M. MacGruder, the B-26 was built on the concept of power, speed and minimal drag. As such, the aircraft's basic appearance was that of an in-flight torpedo tube with wings and engines. The Marauder worked to fulfill the need of the USAAF for a medium-weight, strike-capable bomber yielding high performance statistics.
The B-26 was generally armed with 12.7mm heavy machine guns in a top-aft dorsal turret, tail gun assembly, nose emplacement as well as a ventral gun position (in some models). 12.7mm machine guns could be substituted with the 7.7mm (or .303 caliber) if need be, as could the ventral machine gun replaced with two fuselage-fixed 12.7mm (.50 caliber) forward-facing machine guns (low and behind the cockpit). A single torpedo could be affixed to the underside of the fuselage (B-26A and onwards) and over 5,000lbs or bombs could be stored internally.
The B-26 would go on to see combat action against the Japanese in the little-remembered action on Alaska's Aleutian Islands chain.
4 to 5 lbs AUW
460 sq in wing area
A beautiful full scale flying model of the world famous WWII Bomber. This is a builder's kit. Includes all pre-shaped foam and vacuum formed plastic parts. Requires some sanding. Finish in the color scheme of your choice.
All pre-cut foam parts - see pictures at end of this page.
Full set of quality plastics with full scale details
Detailed online construction manual.
Suggested Power Setups:
Note: *Trainer setup uses inexpensive brushed motors and a single ESC
Sport setup uses brushless motors
| Perf.*|| Motor|| Prop|| ESC|| Battery|
| Sport||Rimfire 35-30-950|| 10x7|| 2 x >22A||3S1P, 3700 maH, 20C|
| Sport||Eflite Power 15, 950KV || 10x7|
2 x >26A
|3S1P, 3700 maH, 20C|
| Sport||AXI 2826/10|| 11x7|| 2 x >23A||3S1P, 3700 maH, 20C|
| Sport||KD A22-20L|| 10x7|| 2 x >40A||3S1P, 3700 maH, 20C|
|Liquid Sheeting, 2 sets:
|Model 602, 3 gear system:
|Panel Line Tape, 3 rolls:
|Rivet Stencil, 3 shts: