Copyright 2009. All rights reserved.

Approx 8 oz after mixing

Liquid Sheeted surface

Patent Pending
Liquid Sheeting is a registered trademark of Wowplanes Inc

Instruction Manual for Foam Models

Instruction Manual for Balsa Sheeted Models

Video Tutorial

Description:

• Liquid Sheeting is a coating that can be applied to foam and balsa sheeted model surfaces. 
• It is brushed on with a foam brush, and leaves a glossy, smooth, shell finish.
• Cures in 1 hour to an almond color and can be painted with most paints and spray cans.
• Eliminates sanding.
• Working life is approx 30 minutes. But if kept sealed after mixing working time can be several hours.
• Must be used at temperatures between 70 and 80 degrees and humidity above 35% for best results.
• Storage life is about 6 months at normal room temperature.

Painting:

• Lightly buff the surface with 400 grit sandpaper.
• Wash with soap and water and let dry completely.
• Spray a coat of primer.
• Sand and fill high and low spots if necessarty.
• Spray a second coat of primer.
• Spray the final color coat or coats.
• Most spray paints will work for LSll, but test before applying to model.
• For a high quality finish, Klass Kote is recomemnded. Click here to check it out.

Weight:

• A thin coat of LS-2 is approx 0.1 oz/sq. ft.
• Finished weight will depend on thickness and number of coats applied
• The above info is a guide only and results may vary dependant on application.
   

These planes were liquid sheeted and painted with spray can paints.